Several RGBW controllers distributed over the 4 channels (zones) can be taught into the 4-channel handheld transmitter.

Teach-in: Switch the power supply to the corresponding controller off and on again. The LEDs light up red if the controller has not yet been taught in; otherwise in the last color set. Press the ON button of the corresponding channel within 3 seconds. The LED flashing several times indicates that the controller is paired with the remote control. If additional controllers are taught on the same channel on the remote control, the procedure is the same.

Delete: Set the LED to a color and switch the power supply of the corresponding controller off and on again. Press the ON button of the corresponding channel within 3 seconds. A repeated flashing of the LED indicates that the controller has been deleted from the remote control. If a controller is deleted from a channel that is used multiple times, the deletion process is the same but only the power supply to the corresponding controller is interrupted.

Eine große Auswahl an Artikeln zur Regalbeleuchtung finden Sie bei unserem Partner LEDS24.com.